GE Industrial Solutions AF-650 GP Drive Panel - Manual (Page 27)

27
Your AF-650 GP Non-Bypass & Disconnect Drive Panels comes with an AF-650 GP Adjustable Frequency Drive
from GE Drives mounted on or in an enclosure, which contains the following equipment to control motor
operation from the drive.
ABB  / FERRAZ SHAWMUT Non-Fused Disconnect w/through-the-door lockable handle (or equivalent)
ABB  / FERRAZ SHAWMUT Fused Disconnect w/through-the-door lockable handle (optional)
(or equivalent)
Ferraz Shawmut Fused Disconnect w/through-the-door lockable handle (optional) (or equivalent)
GE Spectra RMS TM Mag-Break Solid State Circuit Breaker w/through-the-door lockable handle
GE Harmonic Matrix filters – D Series (Optional)
GE C-2000 TM Selector Switches
GE Type IP Encapsulated or Vacuum Impregnated 115 VAC Control Power Transformer w/fuses
Busman/ Ferraz Shawmut Amp-trap  Time-Delay Class J Fuses (or equivalent)
GE Line Reactors (optional)
GE DC Link Reactors (Drive inbuilt)
MTE Line or Load reactor
These instructions are intended as a supplement to the User’s Guide for the AF-650 GP drive. For
programming, operating and troubleshooting instructions for the adjustable frequency drive please refer to the
User’s Guide, which is included with your panel documentation package.
DET - 607 AF 650 GP User’s Guide for up to 50HP @ 208V @ & up to 100HP @460/575V.
DET - 608 AF 650 GP User’s Guide for 125HP and above @ 460/575V
Also included with your panel documentation package are installation instructions, electrical and mechanical
drawings of your panel.
DEH40658
– Page 1 AN 11-2021 Rev 06, 12/16/2011
OPERATING AND TROUBLESHOOTING INSTRUCTIONS FOR
AF-650 GP NON-BYPASS & DISCONNECT DRIVE PANELS