GE Industrial Solutions AF-650 GP Drive Panel - Manual (Page 51)

51
Table – 3 (575V)
Device
AF - 600 Hp
Rating(s)
Minimum Wire
Size
Maximum Wire
Size
Required Torque
NON FUSED DISCONNECTOR
AND FUSE BLOCK
1 through 10 # 14 AWG # 4 AWG Note 1
15 through 40 # 14 AWG # 4 AWG Note 1
50 through 60 # 8 AWG 1/0 Note 1
75 through 100 # 8 AWG 1/0 Note 1
FUSED DISCONNECTOR 1 through 40 # 10 AWG # 3 AWG Note 1
50 through 60 # 14 AWG # 2/0 AWG Note 1
75 through 125 # 6 AWG # 3/0 AWG Note 1
150 through 300 # 2 AWG 600MCM Note 1
350 through 600 2 X # 2 AWG 2 X 600MCM Note 1
Circuit Breaker 1 through 75 # 12 AWG # 3/0 AWG Note 1
100 through 200 # 8 AWG 350 MCM Note 1
250 through 400 2 X 2/0 2 X 500 MCM Note 1
250 through 400 #8 AWG 600 MCM Note 1
500 through 600 3X #3/0 AWG 3X 500 MCM Note 1
Overload Relay 2 through 25 # 14 AWG # 8 AWG 20 lb. in.
30 through 75 # 10 AWG # 3 AWG 50 lb. in.
100 # 6 AWG 250 MCM 275 lb. in.
Drive output power Terminal
Board
1 through 10 # 24 AWG # 10 AWG 5.3 lb.in.
15 through 20 # 6 AWG # 6 AWG 16 lb.in.
25 through 40 #2 AWG #2 AWG 40 lb.in.
50 through 60 #1 AWG #1 AWG 89 lb.in.
75 4/0 4/0 212 lb.in.
100 300MCM 300MCM 212 lb.in.
125 through 150 2 x 2/0 2 x 2/0 Note1, 2
200 through 350 2 x 350MCM 2 x 350MCM Note1, 2
400 through 600 4 x 500MCM 4 x 500MCM Note1, 2
Continued…
DEH40653 – Page 5 AN 12-1007 Rev 05, 04/04/2012