GE Industrial Solutions AF-600 FP Drive Panel User Manual
Page 45
45
In-Warranty Information Form
The purpose of this form is to provide specific information to GE Drives to aid in expediting part
replacement and/or troubleshooting assistance for AF-600 FP Bypass OR NON Bypass OR Disconnect
Drive panels. The following information is required prior to any assistance being provided.
Panel Model Number :
Panel Serial Number :
Start-Up Date :
Failure Date :
I. Application Information:
Input Transformer: _____ kVA
Wiring distance between motor & drive ______ ft.
Power Factor Correction Capacitors: _____ Yes ( _______ Microfarad)
_____ No
Other Equipment on Same Power: _____ Yes
_____ No
If Yes, what? ______________________________________________________
II. Function Code Different From Factory Settings:
FC
Setting
FC
Setting
III. Failure Message:
Latest Fault
Previous Fault
IV. Status When Failure Occurred (check one):
_____ Power Up
_____ Running
_____ Inverter Mode _____ Bypass Mode
V.
Description Of Failure:
______________________________________________________________________________
______________________________________________________________________________
Once all the required information above is acquired, contact the following number for assistance:
GE Industrial Systems
phone:
1-800-533-5885
(24hrs.)
DEH40606
– Page 1
AN 11-2021 Rev 04, 12/15/2011