GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 25)

GEH-6405A Toolbox for an AVDV Series Drive Chapter 3 Using the Toolbox
•
3-7
À To change the password
1. From the Options menu, choose Password . The Changing password
dialog box displays .
2. Click on the privilege level to change.
3. Click OK . The Changing password dialog box displays to enter the new
password.
Change Password or Default Password Directory
Enter the old password
in text box 1) and press
the Tab key.
Enter the new password
in textbox 2) and press
the Tab key.
Enter the new password
again in text box 3) to
verify it is correct.
Tab
Tab
When a password is created, it is encoded in the file UCPASSWD.INI in the
Windows NT installation directory. This default directory can be changed, if the user
has a privilege level 2.
À
To change the default password file directory
w
From the Options menu, choose Settings , and then choose the tab General .
Enter a directory or choose a directory
from Browse…
Enter three characters that identify the current user. You
will not be prompted for initializations when values change.
Note It is recommended that the password file be kept on the local PC to avoid loss
of access in the case of downtime on a remote node.