Configuring the drive, Toolbox work area – GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives User Manual
Page 35
GEH-6405A Toolbox for an AVDV Series Drive
Chapter 4 Configuring an AVDV Series Drive
•
4-5
Configuring the Drive
The Toolbox Work Area is the main screen of an AVDV Series drive configuration
(see screen below). This area is used to configure the drive. Across the top of this
screen is the Title Bar, which contains the name of the toolbox and the name of the
file (drive configuration) in use. Under the title bar is the Menu Bar containing all
available menu commands. These commands are described in the section, Working
with Files and Menus.
Toolbox Work Area
Tip
¬ To expand or collapse an item in the Outline View, use the mouse and click
on
. Or, use the left and right arrow keys to expand/collapse the list. To navigate
through the items in the hierarchy list, use the up and down arrow keys.
Outline
View
Log
View
Title bar
Toolbar
Summary View displays detailed information for
each item in the Outline View and diagram
drawings, when Diagram is selected (shown below).
The Detached Summary View
displays Diagram.
Once a new drive is created (or a file is opened), the Outline View displays the drive
name and two items; Main Menu and Diagram.
The default device name is AVDV1
(where additional new devices are
incremented by one). This name
should be modified to more
accurately refer to the drive being
configured. The name is limited to
five characters