GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 40)

4-10
•
Chapter 4 Configuring an AVDV Series Drive GEH-6405A Toolbox for an AVDV Series Drive
Upgrading a Configuration
Refer to Chapter 3, Using the
Toolbox.
The upgrade command adds the required functions of a newer version of the product
to the current drive configuration file. For example, the current drive configuration
file (.acb) is version V01.00.03B. The application requires the functions of version
V01.00.04B. Upgrade the drive configuration file as follows:
À
To upgrade a file
1. Make sure the new required version is installed (refer to Chapter 3).
2. From the current drive configuration file, such as version V01.00.03B described
above, choose the
File menu and choose Upgrade . The following message box
prompts to proceed you with the upgrade.
Click Yes to upgrade
the drive.
Select Upgrade Version
If you select to upgrade the drive, the Select Upgrade Version dialog box
displays all newer installed versions.
Select the required
version.
The following message displays.