GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 50)

4-20
•
Chapter 4 Configuring an AVDV Series Drive GEH-6405A Toolbox for an AVDV Series Drive
Configuration
Parameters
For detailed information
about a parameter, click on
the parameter (to highlight it)
and press F1. The drive contains a set of parameters whose values, together with the pattern and
version, define the drive behavior. In the Outline View of the toolbox, parameters
display as follows:
À
To modify a parameter
Use the Finder to easily
locate a specific parameter. 1. From the Outline View , click on the parameter to modify.
2. Choose the Edit menu and choose Modify .
Or , double-click on the parameter. The Edit Parameter dialog box displays
(refer to the next section).
Tip
¬ If you know the name of the parameter (or partial name) choose the Finder
and enter the name in the text box. Click Find and a list of parameters and variables
display. Double-click on the parameter/variable to modify.