GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 32)

4-2
•
Chapter 4 Configuring an AVDV Series Drive GEH-6405A Toolbox for an AVDV Series Drive
Creating an AVDV Series Drive
When the toolbox starts, the toolbox Work Area displays (refer to the section,
Configuring the Drive). The Work Area is used to maintain the drive configuration
file in the toolbox. You must create a new drive configuration file (.acb) or open an
existing one.
Or choose the New
button.
À
To create an AVDV Series drive
w From the File menu, choose New . The New dialog box contains all installed
toolbox products. Choose the drive as follows:
Click on the tab,
Drives & Exciters.
Click on Innovation
Series Drive and
click OK.