GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives - Manual (Page 51)

GEH-6405A Toolbox for an AVDV Series Drive Chapter 4 Configuring an AVDV Series Drive
•
4-21
Edit Parameter
This function is currently
not available.
Click to display the
detailed Help for this
parameter.
Click to send the new
value to the drive.
This button may not be
enabled for all parameters.
It allows you to change the
display units. (This button
only effects the displayed
values and not the drive
control.)
The new value displays under
the field Drive Value. Enter a new value (within the range) or choose a value from the drop-
down menu. Then, click Send to Drive for the value to take effect.
Enter a note for this
parameter, if desired.
Note When a parameter value is edited, you must click Send To Drive for the value
to take effect. Also, remember to permanently save the parameter, select Device
menu and Save Parameters.