Uploading parameters – GE Industrial Solutions Control System Toolbox For AV-300, DV-300, AV-300i (AVDV Series) Drives User Manual
Page 59
Advertising
GEH-6405A Toolbox for an AVDV Series Drive
Chapter 4 Configuring an AVDV Series Drive
•
4-29
Uploading Parameters
Parameter values can be uploaded from the drive to the toolbox. This is necessary
after a self-tune or when values are modified using the keypad. The toolbox reads all
the values from the drive and compares them to the values in the toolbox. A list of
differences is generated and the user is allowed to select the parameter values to
upload to the toolbox configuration.
À
To upload parameters
w
From the
Device
menu, choose Upload Parameter Values from the Drive, or
click
.
Tip
À Remember to save the toolbox configuration file. From the
File
menu,
choose
Save
or click
.
Advertising