GE Industrial Solutions CPS3200U - Manual (Page 20)

CPS3200U Upstream System – 23” Product Manual CPS3200U
CC848779826 r09 December 2013 20
Set Shelf ID and Attach Alarm Wiring
For systems where alarming is processed through a central controller using serial communications, each shelf must
have a unique address. Otherwise all alarm cards should be left in their factory default state of address 0, 0. Skip this
step if no QS941 will be present in the system.
Warning: You must properly protect yourself against ESD discharge prior to accessing the alarm card and setting shelf
IDs.
Step Action
1. Open the distribution door.
Figure 9 Accessing Alarm Cards
2. Remove the alarm card.
Figure 10 Removing Alarm Card
Note: Door must be level to
remove alarm card