GE Industrial Solutions CPS3200U - Manual (Page 36)

CPS3200U Upstream System – 23” Product Manual CPS3200U
CC848779826 r09 December 2013 36
Installing the Office Alarm Connector
Step Action
1. Plug appropriate length alarm cable into the socket on the side of the controller labeled J1.
Alarm cable options listed below.
2. Dress Cable out to alarm block and use the pinout below to appropriately route the alarms.
Figure 35 Office Alarm Cable Pinout
3. Available alarm cables are as follows:
CC848773671 10ft alarm cable - for QS941 controllers
848748558 25ft alarm cable - for QS941 controllers
CC848764448 50ft alarm cable - for QS941 controllers
848748566 150ft alarm cable - for QS941 controllers