GE Industrial Solutions LP 33U Series 10 & 20 kVA Operating Manual - Manual (Page 22)

Modifications reserved Page 22/63
OPM_LPS_3UO_10K_20K_1US_V010.doc Operating Manual LP 33U Series 10 & 20 kVA / S1
6 LCD SCREEN
6.1 HOME SCREEN
Fig. 6.1-1 LCD display
The keys perform the following functions:
METER METERING View electric parameters values and statistics of use.
See Section 6.2.
ALARM ALARMS Shows in chronological order, all the events occurred (alarms,
messages, commands, handling, etc.). See Section 6.3.
MUTE Key to reset general alarm and buzzer.
SETUP SETUP Allows the user to customize some UPS functions to specific
requirements and to view UPS identification data. See Section 6.4.
CMDS COMMANDS Allows the user to execute UPS operation commands.
See Section 6.5.
The LCD screen, after 5 minutes of inactivity, shuts down the backlight.
To reactivate it, it is sufficient to press any keys.
If the keypad remains inactive for 5 minutes or longer, during the viewing of a screen such as
MEASURES, ALARMS, SETUP or COMMANDS, the LCD screen returns automatically to the main screen.
It is possible to view any key functional description by pushing the key for more than 3 seconds.
Pushing the key “MEASURES” and “ALARMS” together automatically sets the LCD communication for
“ENGLISH”.