Extron Electronics MTPX Plus Series User Guide - Manual (Page 101)

Command/Response Table for IP Setup SIS Commands (continued)
Command Function SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
IP setup commands (continued)
Set e-mail events for recipient E F , X5! , X5$ , X5# EM } IpeF , X5! , X5$ , X5#] You must first have set an e-mail
recipient for the e-mail account number
X5! ), using the separate Set e-mail
recipient (CR) command.
Example: E F , 72 , 0 , 2EM } IpeF*72*0*3 ] E-mail account #72, JSmith, will receive
fail/missing and fixed/restored messages
for both fans.
Read e-mail notifications for one
account (recipient) EX5! , X5$ , X5# EM } X5$ , X5$ , X5$ , ... , X5$]
Set DHCP on or off EX5^ DH } Idh X5^]
Read DHCP on/off status E DH } X5^]
Set serial port parameters EX5& * X5* , X5( , X6) , X6! CP }
Cpn X5& •Ccp X5* , X5( , X6) , X6!]
Read serial port parameters EX5& CP } X5* , X5( , X6) , X6!]
Configure flow control EX5& * X6$ , X6% CF ] Cpn X5& •Cfl X6$ , X6%]
Read flow control E CF X6$ , X6%]
Configure receive timeout EX5& * X6^ , X6& CE ] Cpn X5& •Cce X6^ , X6&]
Read receive timeout E CE X6^ , X6&]
Set mode EX5& * X6@ CY } Cpn X5& •Cty X6@]
Read mode EX5& CY } X6@]
Set verbose mode EX6# CV } Vrb X6#]
Read verbose mode E CV } X6#]
Configure current port timeout E 0* X6* TC } Pti0* X6*]
Read current port timeout E 0TC } X6*]
Configure global IP port timeout E 1* X6* TC } Pti1* X6*]
Read global IP port timeout E 1TC } X6*]
Clear room preset ties E + X2% * X2# P0*! ] Rmm X2% •Spr X2#] Clear all ties in room X2# preset X2# .
Special Characters
The HTML language reserves certain characters for specific functions. The switcher does not
accept these characters as part of preset names, name of the switcher, passwords, or locally
created file names.
The switcher rejects the following characters:
{space (spaces are ok for names)} + ~ , @ = ‘ [ ] { } < > ’ “ semicolon (;) colon (:) |
\ and ?.
MTPX Plus Series • Programming Guide 95