Extron Electronics MTPX Plus Series User Guide - Manual (Page 109)

IP Settings/Options window
The IP Settings/Options window (click Tools > IP options , see figure 54 ) provides a
location for viewing and, if connected via the either serial port or if you are logged on via
the LAN port as an administrator, editing settings unique to the Ethernet interface. See the
“
Ethernet Link ” section on page 146 for basic information about IP addresses. User log-ins
cannot edit any of the fields on this screen.
NOTE: Editing variables on the IP Settings/Options screen while connected via the
LAN port can immediately disconnect the user from the switcher. Extron
recommends editing the settings on this screen using a serial port and
protecting the Ethernet access to this screen by assigning an administrator
password to qualified and knowledgeable personnel only.
Figure 54. Control Program IP Setting/Options Window
NOTE: When the control program is connected to the switcher via a serial port, the
Administrator and User Password fields are not masked. If a password has been
inadvertently changed to an unknown value, you can look up and, if desired,
change a password in this window without knowing the current password.
MTPX Plus Series • Matrix Software 103