Reference information, Specifications – Extron Electronics VN-Matrix 200 Series User Manual

Page 119

Advertising
background image

Reference

Information

Specifications

Video input

Number/signal type ........................ 1 DVI-I: analog RGBHV, RGsB, HDTV component video

(progressive, interlaced) or single link digital DVI (DVI-D)

Connectors .................................... 1 female DVI-I
Nominal level ................................. 1.0 Vp-p for Y of component video

0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels .............. Analog: 0.0 V to 1.0 Vp-p with no offset
Impedance ..................................... 75 ohms
Resolution range ............................ 640x480 to1600x1200, 1920x1200 (with reduced

blanking) @ 23.97 Hz to 85 Hz
Also 525i, 625i, 720p, 1080i, 1080p

Standards ....................................... DVI 1.0

Video processing

Digital sampling ............................. 24 bit, 8 bits per color, 165 MHz standard
Colors ............................................ 16.78 million
Compression .................................. PURE3

Codec

Frame rate delay ............................. 35 ms (70 ms encoding/decoding)
Bit rate ........................................... 1 Mbps to 200 Mbps
Bit and frame rate control .............. Selectable
Frame rate ...................................... Up to 60 fps @ 1080p

Video output

Number/signal type ........................ 1 DVI-I: analog RGBHV, RGsB, or single link digital DVI

(DVI-D); follows input or is scaled

Connectors .................................... 1 female DVI-I
Nominal level ................................. 0.7 Vp-p for RGB
Minimum/maximum levels .............. 0.0 V to 1.0 Vp-p
Impedance ..................................... 75 ohms
Scaled resolution ............................ 640x480 to1600x1200, 1920x1200 (with reduced

blanking) @ 23.97 Hz to 85 Hz
Also 525i, 625i, 720p, 1080i, 1080p

Scan mode ..................................... Follow mode: output follows input

Scale mode: set to match the resolution and frame rate of
the local display

Sync

Input type ...................................... RGBHV, RGsB, bi-level component video
Output type ................................... RGBHV
Input level ...................................... 2.75 V to 5.0 Vp-p for RGBHV

0.3 Vp-p for RGsB or component video bi-level sync

VN-Matrix 200 Series • Reference Information

114

Advertising
This manual is related to the following products: