Vnd 200 dvi-i — decoder only, Functional overview, Encoder source compatibility – Extron Electronics VN-Matrix 200 Series User Manual

Page 8

Advertising
background image

VND 200 DVI-I — Decoder Only

The VND 200 is a decoder-only device and is compatible with other VN-Matrix products
including the VNM Enterprise Controller and the VNC 200 configured as a controller.
The VND 200 does not support:

Mouse and keyboard operation

RS-232 client / server operation

Decoder

12V DC

5A MAX

POWER

1 — LAN — 2

IN

OUT/

LOOP

AUDIO

SPDIF

REMOTE

TO PC

IN

IN

DVI-I

OUT/LOOP

RS-232

OVER LAN

Figure 3.

VND 200 DVI-I, Decoder — Back Panel

Functional Overview

Device Name

Part Number

Standard Features

Optional Features
by License

VNC 200 DVI-I

60-1117-01

Codec, video, keyboard
and mouse, output scaling,
RS-232

Whiteboard and data
support

VNC 200 DVI-A 60-1118-01

Codec, video, audio,
keyboard and mouse,
output scaling, RS-232

Whiteboard and data
support

VNE 200 DVI-I

60-1119-01

Encoder, video, audio

None

VND 200 DVI-I

60-1120-01

Decoder, video, audio,
output scaling

None

The VNC 200 can be configured to operate in one of two modes:

As an encoder to encode a source and stream it across a network

As a decoder to decode and display a VNC 200 data stream from a network

Any VNC 200 matrix system will contain at least two devices, one configured as an
encoder and the other as a decoder. Multiple encoders and decoders may co-exist on the
same network.

Encoder Source Compatibility

As an encoder, the VNC 200 is compatible with digital (DVI) and analog (RGB) graphic
sources up to WUXGA (1920 x 1200) resolution (see “

Technical Data

for a list of

standard supported sources).
The VNC 200 incorporates advanced image acquisition circuitry which can auto-detect a
wide range of source types without the need for any additional setup.
For special or non-standard source formats, user-customizable source modes can be
created using the web interface (see “

Advanced Source Setup

for further details).

NOTE: The VNC 200 provides analog-to-digital or digital-to-analog conversion via its

monitor connections. Therefore, it is possible to use a digital monitor with an
analog source and vice versa.

VN-Matrix 200 Series • Introduction

3

Advertising
This manual is related to the following products: