Extron Electronics VN-Matrix 200 Series - Manual (Page 15)

Installation
and Basic Setup
Procedure
This section describes the following:
• Choosing a Suitable Location for Mounting
• Environmental Requirements
• Mounting Requirements
• Power Connection via PSU
• Power Cord for PSU
• Setup and Connection Procedure
Choosing a Suitable Location for Mounting
The VNC 200 is designed to be used either as a free-standing unit or mounted in a
19-inch rack using optional mounting kits.
CAUTION: Whichever installation method you choose there are certain environmental
requirements, detailed in “ Environmental Requirements ”, which must
be observed in order to ensure safe and reliable operation.
For rack-mounted applications the criteria detailed in “
Mounting
Requirements ” must also be observed.
Environmental Requirements
CAUTION: The criteria in this section must be observed for all installations of the
VNC 200, whether free-standing or rack-mounted.
Orientation
The VNC 200 is designed to be used free-standing on a stable, horizontal surface. It can,
however, be used in any orientation subject to the necessary ventilation requirements.
Temperature
DO NOT install or operate the VNC 200 in an area where the ambient temperature
exceeds 35°C (95°F) or falls below 5°C (35°F).
As with all electronic equipment, the VNC 200 and its associated PSU produce heat which
may affect the ambient temperature.
VN-Matrix 200 Series • Installation 10