Extron Electronics VN-Matrix 200 Series - Manual (Page 43)

Figure 33. Nodata Slash Mode
Nodata Splash Mode
If a VNC 200 decoder is not displaying a source (for example, if no source is selected,
has become disconnected, or is in the wrong format), it offers two different display
options.
The required option is selected using the
Nodata Splash checkbox:
• Displays a splash screen (see example
right),
or
• Displays the last frame of valid source
data (black if no data is available).
Scaling
In normal operation the decoder output format is set to auto and the output
resolution will be the same as the encoded source resolution.
For applications where it is necessary to set the output of the decoder to match the
resolution of the locally connected display, the
scale option may be enabled and the
required output resolution can then be selected from the Output Format drop down
list, as shown below.
VN-Matrix 200 Series • System Configuration 38