Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 110)

Refer to the back of this manual for Factory Service and Technical Support contact information
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 108 of 122
10.3.3.1 Master SNMP Destination
This menu item enables the Supervisor to set a NMS destination as master.
Select from the pull-down menu.
Select None if SNMP connection is by dial-out or no trap recovery (after network block out) is
required. This is the default to be backward compatible with legacy CXC trap notification
method.
10.3.3.2 Inform Settings (Trap Acknowledge)
INFORM is similar to a Trap message; has a response from the Network Management Software
(NMS) to the SNMP Agent. See Figure below:
Any destination set with
INFORM should never be
used as Master SNMP
Destination.