Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 26)

Refer to the back of this manual for Factory Service and Technical Support contact information
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 24 of 122
4.6.2 Alarm History
Tap “Show Alarm History” to enter another screen that will list past alarms. Two pull-down menus enable
the user to select which alarms will be displayed according to status and priority, see Figure 13 below:
Figure 13–Alarm History screen
4.7 Argus Icon (active area)
Tap the Argus icon at the lower left of the “home” page to login (password entry), adjust contrast of display, reset,
and select language, see Figure 14 below:
Figure 14–Argus icon pop-up window on home page
4.7.1 Login (password entry)
When the user attempts to login (e.g. tapping the icon and selecting Login from the menu prompt), a pop-up
window for password entry will be presented, see Figure 15 below:
Figure 15–Password entry pop-up window
NOTE: If the CXC is already being accessed remotely, a pop-up window will appear to notify the local user that she or he
will not be able to login and that “Another operator is currently logged in.”
Argus Icon enables access to menu tree, etc.
tap to login
Pop-up window
tap to make selection from list of items
Login
Contrast
Reset
0: English
1: (Chinese)
2: Français
Tap to accept or cancel
Use backspace key
to erase last entry as needed
Use number keys to enter password
Each character of the password entry will
appear in this window for verification
FL + TC 54.00V 250A
Tap to “Remove Cleared” alarms
from display
Use pull-down menu
to select status as shown
Alarm will scroll here...