Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 61)

Visit the Alpha website at www.alpha.ca for the latest manual and product downloads
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 59 of 122
6.6.1 Calibrate Analog Inputs
This menu item provides a direct link to the Analog Inputs menu heading; which may also be accessed via the
menu item Configure Signals, see 6.6.2.
6.6.1.1 Analog Inputs
This menu item will display a list of all the existing analog input channels.
Definitions
The majority of the CXC’s analog input channels are each designed to accept a specific input
signal, where:

= Installed
BiV = -60V to +60V
I = -50mV to +50mV
T = -55
C to +100C (powered)
V = 0 to 60V
X = Not Installed
The following table summarizes the analog input channel assignments; which may vary
depending on the hardware configuration (list options):
Channel Assignment
List Option
120 121 122 123 124 125 129
V1       
V2   X    
GP1 T1 T1 T1 T1 V3 T1 T1
GP2 T2 T2 T2 T2 V4 T2 T2
GP3 X T3 X T3 V5 BiV T3
GP4 BiV T4 BiV T4 T1 BiV T4
I1       
I2 X  X X X  
I3 X X X X X  
I4 X X X X X  
Table C–Analog input channel assignments