Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 16)

C h a p t e r 1 I n s t a l l i n g Y o u r S t u d i o C a r d
1-10 Antex StudioCard Copyright © 1997
Step 5 Gently insert the
Antex StudioCard
into an available
PCI expansion slot,
then press down to
set it firmly into the
expansion slot, as
is shown in the
figure at right.
Step 6 Secure the Antex StudioCard in place with the retaining screw
you removed earlier from the expansion slot cover.
Step 7 If you are installing only one Antex StudioCard at this time,
continue to Step 8.
If you are installing two or more Antex StudioCard cards, skip
to Chapter 5, Synchronizing Multiple StudioCard Cards now.
Then, return to Step 9 when finished.
Step 8 If you will be using your StudioCard in conjunction with the
Perception PVR without the Perception Effects board (PFx),
continue to Step 9.
If you are using the PFx board with the PVR or a video capture
board from any other manufacturer (Truevision, Intergraph,
Matrox or other), skip to step 11.