Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 22)

C h a p t e r 1 C o n n e c t i n g Y o u r E x t e r n a l E q u i p m e n t
1-16 Antex StudioCard Copyright © 1997
Note
Step 3 Locate the Digital Audio I/O Cable show below.
Step 4 Attach the Digital Audio I/O Cable to the Digital Audio and Sync
I/O port on the bracket and secure it in place with the locking
screws.
Step 5 Attach your external audio / video equipment to the appropriate
analog and digital cable connectors, using the white tags above
each connector for reference.
Specific pinout information is provided in Appendix B.
Theory of Operation information for these cables is
provided in Chapter 6.
Step 6 Plug in your computer and power it on.