Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 18)

C h a p t e r 1 I n s t a l l i n g Y o u r S t u d i o C a r d
1-12 Antex StudioCard Copyright © 1997
You will connect to the PVR board here.
With the computer turned OFF, insert the end of the cable with
the flat black plastic connector over pins 37 and 38 on the
CVE-2 video bus expansion connector on the PVR board. The
embossed arrow on the plastic connector must be
oriented toward the top edge of the PVR board. The
locations of pins 37 and 38 are shown below.
Step 10 Connect the metal
SMB connector on
the other end of
the cable to the
gold CLOCK IN
connector on the
top of the
StudioCard.
2 4 6 8 …………………. 38 40
1 3 5 7 …………………. 37 39