Installing studiocard nt drivers and software – Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 User Manual
Page 24
C h a p t e r 1
I n s t a l l i n g S t u d i o C a r d N T D r i v e r s a n d S o f t w a r e
1-18 Antex StudioCard
Copyright © 1997
Note
Installing
StudioCard
NT Drivers
and Software
The StudioCard comes with two programs—Antex Demo and
Antex Mixer—as well as drivers for Windows NT/2000.
The Antex Demo is used primarily for testing your
StudioCard and demonstrating its capabilities.
The Antex Mixer is a powerful patch bay, mixing console,
and configuration tool for the StudioCard.
To install the drivers, Antex Demo, and Antex Mixer, simply
follow the step-by-step instructions below.
Be sure to check Antex’ web site periodically for the latest
StudioCard drivers. Our web address is www.antex.com.
Step 1
Insert the appropriate Antex Drivers and Software diskette into
your floppy drive.
If your computer has an
Intel processor, use the
PN 9000-2362-7001 disk.
If your computer has an
Alpha processor, use the
PN 9000-2362-7004 disk.