Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 17)

I n s t a l l i n g Y o u r S t u d i o C a r d C h a p t e r 1
Antex Electronics Corporation Antex StudioCard 1-11
Step 9 The DPS PVR provides a 27MHz clock on the CVE-2 video
bus expansion connector. This signal will be connected to the
StudioCard using the provided Sync cable, PN 210-0398, as
the master clock reference. The StudioCard and the PVR
must be located near enough for the cable to reach between
the boards.
Locate the PVR Sync cable. On the black plastic end, identify
the pin with the embossed arrow.
Orientation of this pin during
installation is extremely important.