Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 31)

I n s t a l l i n g W i n d o w s 9 5 / 9 8 D r i v e r s C h a p t e r 1
Antex Electronics Corporation Antex StudioCard 1-25
Step 3 Verify the Windows
95/98 driver diskette
is inserted into driver
A: and click OK.
Step 4 Select the
StudioCard and
click OK.
Installation of the drivers will proceed and complete automatically
from this point. You may be asked to reboot when installation is
completed. If so, select Yes and reboot.
You may also need to configure your software application.
Users of Cakewalk Pro Audio are recommended to set the
StudioCard Wave Out 1 and Wave In 1 as the timing masters
under Settings/Audio Options. Under advanced, select
Simultaneous Record and Play. The Wave Profiler should also
be run.