Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 41)

C h a n g i n g D r i v e r S e t t i n g s i n W i n d o w s 9 5 / 9 8 C h a p t e r 1
Antex Electronics Corporation Antex StudioCard 1-35
Note
Step 5 Select the 2 or 4
checkbox, and the
SRP checkbox
becomes active.
Check the box to
the left of SRP and
click OK. The
driver will then be
set for two or four
devices that can
each record and
play.
Selecting the Resources tab on the StudioCard Properties
may cause your system to appear frozen. There is typically
no reason to view Plug and Play Resources. If this does
happen, be patient, as the system will come back after
several minutes. This delay is due to a limitation in
Windows 95/98. You may also Ctrl-Alt-Del to end the
Windows task.