Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 64)

S e l e c t i n g t h e A c t i v e A n t e x Mi x e r C h a p t e r 3
Antex Electronics Corporation Antex StudioCard 3-15
Selecting the
Active Antex
Mixer
The Antex Mixer can be used with up to four physical
StudioCards. To select the StudioCard for which the Mixer is
active, click on Mixer in the menu bar; then select 1-Antex
StudioCard Mixer through 4-Antex StudioCard Mixer. The
figure below illustrates the Mixer as it appears with only one
card in the system. Note that the title bar also reflects which
card the mixer has been configured to control. The Mixer
program may be opened more than once, allowing a separate
display for each card in your system.
If there is only one StudioCard installed, the Antex Mixer will
automatically default to 1-Antex StudioCard Mixer.