Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 96)

I n t r o d u c t i o n C h a p t e r 5
Antex Electronics Corporation Antex StudioCard 5-3
Note
Introduction Up to four StudioCards may be installed in your computer to
increase the number of physical inputs and outputs. The
StudioCard has been designed so that playback and recording
on all channels in a multiple card system can be synchronized
to sample accuracy using a common clock reference. This is
accomplished by configuring the cards so that one card acts as
master and supplies a word clock to the other slave cards in
the system.
This chapter will guide you through the physical installation and
software configuration for multiple cards:
Installing Multiple StudioCards
Identifying Adapter Numbers
Establishing Master and Slave(s) Cards
Making Board-to-Board Clock Connections
Configuring Clock Source Settings
The optional cable (PN 210-0395) must be obtained from
Antex Electronics for each additional StudioCard you plan
to install.