Antex Electronics StudioCard AV Pro, StudioCard 2000, & SC-22 - Manual (Page 97)

C h a p t e r 5 I n s t a l l i n g Mu l t i p l e S t u d i o C a r d C a r d s
5-4 Antex StudioCard Copyright © 1997
Note
!
Installing
Multiple
StudioCard
Cards
Follow the instructions below to install multiple StudioCards.
If you are installing StudioCards for the first time, and have
come from Chapter 1, skip to Step 3. If you previously
installed an StudioCard and are now adding additional
cards, begin at Step 1.
CAUTION: Static electricity can damage your
StudioCard and your computer. Every time you move,
you are creating static electricity, even though you
can’t see it. Therefore, take the following
precautionary actions while installing your StudioCard:
1. Do not remove the StudioCard from its anti-static
bag until instructed to during the installation
process.
2. Move the StudioCard and its cables in close
proximity to your computer. Once you begin the
installation process, do not walk around with the
StudioCard so that you do not build up static
electricity.
3. Power OFF your computer, then touch the non-
painted backside to discharge static electricity from