eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 13)

13
Note
The operator also has the option of analyzing video and audio data manually
Depending on the task, the results of the data analysis are transferred to and utilized by other
subsystems of the software package, such as the event registration subsystem, the notification
subsystem, the relay subsystem, and others.
Integrated use of the following types of detection tools enables the functions of the analytics
subsystem:
1. Situation analysis detection tools
2. Basic video detection tools
3. Basic audio detection tools
4. On-board detection tools of video cameras (video stream processing)
5. Embedded analytics (processing of signals from a "dry contact" sensor of a video camera).
The results of the video data processing appear on the video surveillance monitor.
Thanks to EyStream's analytics subsystem, the user can utilize the following functions:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Setting detection zones and/or masks
Detecting the beginning and/or stop of motion of an object in a set area of a video camera's
field of view
Detection of an object crossing a set line in a video camera's field of view
Detecting the appearance and/or disappearance of an object in a set area of a video
camera's field of view
Detecting abandoned items in a set area of a video camera's field of view
Detecting loitering (prolonged presence) in a set area of a video camera's field of view
Detecting changes in the position of a video camera in space
Detecting loss of image quality
Detecting the absence/presence of an audio signal from a microphone
Detecting noise
Functions for video stream processing, provided by the on-board video camera detection
tools that are part of EyStream
Processing of signals (non-contact/contact) from embedded "dry contact" sensors of video
cameras, with the possibility of configuring the execution of a specific action when such
signals are received (see next item)
Setting the responses that are automatically executed when a detection tool is triggered
(individually for each detection tool)
Simultaneous use of various types of detection tools
The PTZ Subsystem
The PTZ subsystem encompasses all the tools that provide for remote control of a PTZ device and
the lens of a video camera.
In the EyStream software package, the Telemetry system object enables the functions of the
PTZ subsystem. You can access these functions through the PTZ device control panel.
Note
You can also control a PTZ device with a physical USB joystick (the system
automatically determines when such a device is connected to a computer with
EyStream installed)
Thanks to EyStream's PTZ subsystem, the user can utilize the following functions:
eLineTechnology.com 303.938.8062