eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 86)

86
2. If you want for the web server to start at the same time as the Server in the EyStream sof
tware package, set the Autorun setting to Yes (1). The default value is Yes.
3. If you want to disable the web server, set the value of Started to No (2).
4. In the corresponding fields, enter the user name and password for connecting to the web
server (3).
5. In the Port field, enter the port number on which the web server will be located (4).
6. In the Prefix field, enter the prefix that is added to the server address (5).
7. In the Group list, select the group of video cameras that you want to make accessible on
the web server (6).
8. Click the Apply button.
The web server is now configured and available over the Internet at the following address:
http://<IP address of EyStream Server>:<Port>/<Prefix>. For example, if the server's IP
address is 10.0.11.1, the port is 8000, and the prefix is /asip-api, then the web server can be
accessed at the following address:
http://10.0.11.1:8000/asip-api .
Configuring detection tools
Types of detection tools
In the EyStream software package, several types of detection tools process incoming data:
1. Situation analysis detection tools
2. Basic detection tools:
a. Video analytics
b. Audio analytics
3. Detection tools embedded in a video camera (Embedded analytics):
a. Video stream processing detection tools
b. Detection tools which process signals from the video camera's sensor
Detection setup takes place using the interface in the Detection Tools tab (under Settings). For
detection setup you must have the appropriate permissions.
eLineTechnology.com 303.938.8062