eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 97)

97
1. In the Detection Tools list, highlight a Video Detection Tool object which offers a means
of analyzing the video image from the desired video camera.
2. Select Yes from the Enable list.
3. Click the Apply button.
Video detection is now enabled.
The desired video detection tools may be enabled in the same way as video detection.
Setting General Parameters of Video Motion Detection
To set the general parameters of video detection tools, you must perform the following steps:
1. In the Detection Tools list, highlight a Video Detection Tools object (1) which offers a
means of analyzing the video image from the desired video camera.
2. If it is necessary to decode frames every 500 milliseconds or less often, in the Decode
keyframes list, select Yes (2).
Important
This setting applies to all codecs. If a codec has keyframes and p-frames,
the keyframe is decoded no more often than every 500 miliseconds.
This feature reduces the Server load but, as can be expected, negatively
impacts the quality of detection.
This setting should be activated on "blind" Servers (Servers that do not
display video) on which it is necessary to perform detection.
eLineTechnology.com 303.938.8062