eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 57)

57
3. Connecting to the primary server.
4. Adding the remaining Servers to the EyStream Domain from the primary Server according
to the instructions in the section Adding a Server to an existing EyStream Domain .
In the second typical case it is necessary to add servers which are part of another EyStream
Domain to a new EyStream Domain. This case involves the following steps:
1. Excluding all the Servers which are to be added to the new EyStream Domain from their
current EyStream Domains, according to the instructions in the section Removing a Server
from an EyStream Domain .
2. Naming the new EyStream Domain according to the instructions in the section Creating a
new domain , when attempting to connect to one of the Servers excluded in step 1.
3. Adding the remaining Servers to the EyStream Domain from the primary Server
according to the instructions in the section Adding a Server to an existing EyStream
Domain .
Preliminary Configuration of Devices
When you launch the EyStream software package for the first time, you can perform the
following preparatory operations:
1. Selecting IP devices to register as objects.
2. Configuring a default archive for selected IP devices.
Note
A default archive is one in which records are made when an operator initiates an
alarm
To do this, click Yes in the IP device configuration application dialog box (1).
Note
To skip the preparatory stage when launching EyStream, click No (2)
eLineTechnology.com 303.938.8062