eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 61)

61
the warning and realize the risk of losing important data, then click Format. Otherwise,
click Cancel to return to preliminary archive settings.
Configuration of the default archive is complete.
Configuring System Objects for Devices
The Server Object
The General Settings group displays information about the software package (license, driver
version, etc.) which cannot be edited.
The web server in the EyStream software package can be configured in the Web Server group of
settings (see the section
Configuring the web server ).
The Video Camera Object
Creation and configuration of the Video camera object is done in the Hardware tab. The object
tree of a video camera is generated automatically according to its functions which are integrated
into the EyStream software package (the presence of alarm inputs, relay outputs, PTZ unit, etc.).
The objects for the video cameras found on the network are first shown in the Unallocated
Equipment list. After these objects have been moved to the list of server equipment, their
configurations will be accessible for editing.
In the Object Features group you can see the following video camera features:
1. MAC address
2. IP address (determined automatically, can be changed if necessary)
3. Manufacturer, model, firmware
4. Driver information
5. Port used to transmit data between the video camera and the EyStream software package
(this value is set to 80 by default but can be changed if necessary)
To configure the Video camera object, perform the following:
1. Highlight the object in the list of devices on the Server (1).
eLineTechnology.com 303.938.8062