eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 59)

59
To skip configuration of the default archive for the selected video cameras and start the EyStream
software package, click the Cancel button.
To configure the archive, you must perform the following steps:
1. Select the Use for archive check boxes for the disks which are to be used to store the
default archive (1).
Note
The following information is provided for each disk: total volume, total
occupied space, and total free space (2)
2. If you need to use an archive volume already located on the disk, select the Use current
volume check box (3).
Note
The size of the existing volume is indicated in the Use current volume fiel
d
3. Specify the archive size (minimum of 1 GB) for each selected disk (3). You can specify the
archive size by using one of the following four methods:
a. Move the slider to the position corresponding to the volume of disk space allotted for
the archive.
b. Manually enter the archive size as a percentage of total disk space (in the % of the
disk field).
c. Manually enter the archive size as a percentage of free disk space (in the % of free
space field).
d. Manually enter the archive size in gigabytes (in the Archive size, GB field).
eLineTechnology.com 303.938.8062