eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 27)

27
Installation the EyStream Software Package
Types of Installation
The following two types of installations are available when installing EyStream to a personal
computer:
1. Server and Client— This type of installation is used to accomplish the following tasks:
a. Physical connection to a personal computer and software configuration of video and
audio capture devices (video cameras, microphones), event generation devices
(sensors, relays, etc.), and hard disks for organizing data archives
b. Configuring the security system architecture (creating the necessary system objects
and defining the connections between them)
c. Installing the software's user interfaces, which enable any user to connect to any
server within a single security system and to perform
administration/management/monitoring of a guarded location based on the
permissions granted by the administrator
2. Client – This type of installation is used for installing the software's user interfaces, which
enable any user to connect to any server within a single security system and to perform
administration/management/monitoring of a guarded location based on the permissions
granted by the administrator.
The way in which the basic properties of a computer in the security system depend on the type of
EyStream installation is presented later.
Properties / type of
installation Client Server and Client
A constant connection to
another machine is required + -
Devices are connected locally - +
A local user interface is
available + +
Installation
To install EyStream, regardless of the type of installation, you must perform the following steps:
1. Insert the EyStream installation CD into the CD-ROM drive. A dialog box will display the
disk content
eLineTechnology.com 303.938.8062