eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 58)

58
When you do this, the IP device configuration application will launch.
When you launch this application, the program will automatically search for connected IP devices.
Devices which are found are displayed in the Select devices for activation list.
Note
IP devices whose vendor, model and/or firmware version has not been
determined are displayed in the Advanced configuration required
In the Select devices for activation list, select the check boxes for those devices which need
to be registered as EyStream objects and then click Apply.
If you need to search for IP devices again, click Search.
After closing the IP device configuration application (by clicking Apply or Cancel), the user will be
prompted to configure the default archive for the video cameras (IP devices) selected in the first
step.
eLineTechnology.com 303.938.8062