The telemetry object – eLine Technology EYS-VMS eyStream User Manual Part1 User Manual
Page 75
75
The microphone will then be switched to its assigned work mode.
To check the microphone's operation, you must perform the following steps:
1.
Select the Sound on/off check box in the Summary group.
2.
Provide an audio signal to the microphone.
3.
If the microphone is configured correctly, the audio signal will be transmitted to the server's
speakers. The strength of the incoming audio signal will be displayed on the indicator to the
right of the Sound on/off check box.
Checking microphone operation is now complete.
The Telemetry Object
The Telemetry object displays the characteristics of the PTZ device that should be connected to a
PTZ video camera.
To configure a Telemetry object, perform the following:
1.
Select the Telemetry object in the objects tree
2.
Enable the PTZ device by selecting Yes in the Enable field (1).
3.
Enter the name of the PTZ device (2).
4.
Enable patrol mode. When patrolling is enabled, the video camera automatically changes its
position along a route defined in its presets list
eLineTechnology.com
303.938.8062