eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 74)

74
When you do this, the Microphone object will become a child of the specified Camera object.
Note
This setting is used during synchronized video and audio monitoring of a situation
as well as during synchronized video and video recording to the archive (see the
section Audio Monitoring)
Note
This setting is relevant only for microphones connected to IP servers. The
microphone and the video camera to which it is to be linked must be connected
to the same IP server
If the microphone is embedded in a video camera or physically connected to it, then its
corresponding object will be automatically displayed in the objects tree as a child of that particular
video camera.
To configure the Microphone object, perform the following:
1. Select the Microphone object in the objects tree.
2. Enable the microphone by selecting Yes in the Enable field (1).
3. Enter the name of the microphone in the Name field (2).
4. Configure additional microphone parameters (audio codec, bit rate, etc.) in the Other group
using their descriptions in the interface of the EyStream software package or, for more
detail, in the official reference documentation of the parent video camera.
5. Click the Apply button.
eLineTechnology.com 303.938.8062