eLine Technology EYS-VMS eyStream User Manual Part1 User Manual
Page 82
82
2.
Click the
button (2).
3.
Click the Apply button.
4.
When you do this, an E-mail object appears in the list of devices (3).
Creation of the E-mail object is now complete.
Configuring the E-mail Object
To configure an E-mail object, you must perform the following steps:
1.
In the list of devices, highlight the E-mail object which needs to be configured (1).
2.
Activate the E-mail object (2) by selecting Yes in the Enable list.
3.
In the Name field (3) enter the desired name of the E-mail object.
4.
In the Notification delivery parameters field (4) , set the delivery parameters for the
e-mail message:
a.
In the To field, enter the e-mail address to which the messages will be sent.
b.
In the From field, enter the e-mail address from which the messages will be sent.
5.
In the SMTP server settings field (5) , enter the settings of the outgoing mail server:
a.
In the Name field, enter the name of the user account used to send messages on the
outgoing mail server.
b.
If you need to use an SSL-encrypted connection when connecting to the outgoing mail
server, select Yes from the Use SSL list.
c.
In the Password field, enter the password for the user account on the outgoing mail
server.
d.
In the Port field, enter the number of the port used by the outgoing mail server.
e.
If, when using an encrypted connection, the SSL certificate must be checked, select Y
es from the Certificate check list.
f.
In the Outgoing mail server field, enter the name of the outgoing SMTP mail server.
6.
Click the Apply button.
eLineTechnology.com
303.938.8062