Burkert Type 1062 - Manual (Page 11)

11
Technicaldata
Type 1062
5. ATEX certification body and certification number
6. Item number
7. Manufacturing code
8. Conformity Marking
9. Actuator size
10. Mode of operation
11. Limit switch type
12. Operating zone
13. ATEX logo
14. Serial number
15. Temperature classification
5.5 Versions available
To find out about the versions of the position feedback available,
consult the technical datasheet for the 1062 on our Internet site
under:
www.burkert.com
6 TechnicAl DATA
6.1 conditions of use
Ambient temperature
• version approved by CSA and CE
• version only approved by CE • 0 to +60 °C
• -20 to +60 °C
Air humidity < 80%, non condensated
Protection class acc. to EN 60529 IP65, when wired and
cable gland tightened
6.2 conformity of the 1062 ATeX to
standards and directives
The 1062 ATEX electrical position feedback (version with double
inductive 2-wire NAMUR switch) meets the requirements of the
ATEX Directive 94/9/EC on equipment intended for use in poten-
tially explosive atmospheres. The following standards have been
used in the assessment:
• EN 60079-0 (2004)
• EN 60079-11 (2006)
• EN 61241-0 (2006)
• EN 61241-11 (2007)
english