Burkert Type 1062 - Manual (Page 27)

27
Installationandwiring
Type 1062
danger
Danger due to high pressure in the installation.
▶ Shut down the pneumatic power source and depressurise the
pipes before carrying out work on the device.
Risk of injury due to electrical discharge.
▶ Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
Warning
Risk of injury due to nonconforming installation.
▶ Electrical installation can only be carried out by qualified and
skilled staff with the appropriate tools.
▶ Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶ Take appropriate measures to avoid unintentional activation of
the installation.
▶ Guarantee a set or controlled restarting of the process subse-
quent to the assembly of the device.
8.2 electrical wiring
danger
Risk of injury due to electrical discharge.
▶ Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
use a high quality electrical power supply (filtered and
regulated).
note
the tightness of the position feedback is not guaranteed
when the cover is removed.
▶ Prevent the projection of fluids into the position feedback.
the position feedback may be damaged if a metal com-
ponent comes into contact with the electronics.
▶ Prevent contact of the electronics with a metal component (a
screwdriver, for example).
→
Assemble the device as shown in chap. „7 Assembly“ before
wiring it.
→
Carry out the electrical wiring in accordance with chap. „8.2.1“
to „8.2.6“ for your version of the 1062.
→
Once the device has been wired, lock the cable so that it does
not impair the mobility of the duplication rod, by inserting it
english