Burkert Type 1062 - Manual (Page 25)

25
Assembly
Type 1062
D
→
Insert the duplication system
"D" into the stroke limiter.
D
→
Tighten the duplication
system "D" until free contact
is obtained with the top of
the limiter, using a flat No 27
spanner.
D
→
Fully tighten the duplication
rod on the actuator rod using
a screwdriver with a blade of
suitable size.
→
Depressurize the actuator of a
valve which is normally closed
(function "A") or has a double
effect (function "I"): the valve
recovers its default position.
english