General information, Manufacturer's address and international contacts, Warranty conditions – Burkert Type 1062 User Manual
Page 8: Information on the internet, 4general information
8
Generalinformation
Type 1062
Various dangerous situations (cont'd)
To avoid injury take care:
• not to use outdoors a device approved by CSA.
• not to use this device in an environment incompatible with the
materials from which it is made.
• not to subject the device to mechanical loads (e.g. by placing
objects on top of it or by using it as a step).
• not to make any external or internal modifications to the device.
note
elements / components sensitive to electrostatic discharges
▶ This device contains electronic components sensitive to electro-
static discharges. They may be damaged if they are touched by
an electrostatically charged person or object. In the worst case
scenario, these components are instantly destroyed or go out of
order as soon as they are activated.
▶ To minimise or even avoid all damage due to an electrostatic
discharge, take all the precautions described in the EN 61340-
5-1 and 5-2 standards.
▶ Also ensure that you do not touch any of the live electrical
components.
4
GeneRAl infoRmATion
4.1
manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at:
4.2
Warranty conditions
The condition governing the legal warranty is the conforming use of the
1062 in observance of the operating conditions specified in this manual.
4.3
information on the internet
You can find the user manuals and the technical data sheets on the
1062 and the INERIS 03ATEX0268 X EC design-examination cer-
tificate on the Internet under:
english