Burkert Type 1062 - Manual (Page 12)

12
Technicaldata
Type 1062
6.3 conformity of the 1062 approved
by csA
The devices approved by CSA, with variable key PD01, conform to
the following standards:
• CSA C22.2 n° 61010-1-04
• UL 61010-1
6.4 General technical data
6.4.1 mechanical data
PC or PSU
PA6 or PPS
EPDM
PA or PVDF Stainless steel or
brass
Brass
Fig. 3: Materials used in the 1062 position feedback
component material
Housing / Cover PA6 / PC or
PPS/PSU
component material
Seal between the cover and the
housing EPDM
Cable gland M16x1,5 PA or PVDF
External threaded part Brass or stainless steel
Internal threaded part Brass
M16x1,5
67,5 35
Ø 66
M5 / M6 / M10
12 / 10 / 16
M24x1,5 / M26x1,5 / M36x2
87
72
24 - 40
SW27
Fig. 4: Dimensions of the 1062 position feedback [mm]
english