Impulse 463N - Manual (Page 104)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 104
1U 19 Inch Rack Tray (Part# RK1U)
The RK1U is a 1U rack tray for conveniently mounting your
Sealevel I/O products. Perfect for SeaI/O modules, Ethernet
serial servers, and USB SeaLINK devices. The tray is standard
19 inches wide, 1U (1.75 inches) tall, and 10.7 inches deep.
The rack tray mounts using existing rack mounting hardware
supplied with the rack.
2U 19 Inch Rack Tray (Part# RK2U)
Use this rack tray for conveniently mounting your Sealevel
I/O products. Perfect for SeaI/O modules, Ethernet serial
servers, and USB SeaLINK devices. Adjustable clamp, Part#
RK-CLAMP, is available to hold equipment firmly in place. The
tray is standard 19 inches wide, 2U (3.5 inches) tall, and 14.5
inches deep. The rack tray mounts using existing rack
mounting hardware supplied with the rack.
19 Inch Rack Tray Clamp (Part# RK-CLAMP)
Adjustable clamp used to secure Sealevel I/O products in 2U,
3U and 4U 19 rack trays. Includes mounting hardware.
RS-485 Interconnect Cable, 5 in Length (Part# CA239)
The CA239 interconnect cable can be used to connect two or
more SeaI/O modules together, or a Relio R1100 system to a
SeaI/O expansion module via the RJ45 connectors. This
provides an easy method to cascade RS-485 signals, and
power and ground from one enclosure to the next. The
CA239 is included in the KT122 expansion and strap kit
which provides an easy method to strap two or more SeaI/O
modules together in a stack.
CAT5 Patch Cable, 7' in Length (Part# CA246)
7‟ Blue Ethernet Patch Cable. Can be used to connect SeaI/O
Ethernet modules to a hub (included with 4xxE SeaI/O
Ethernet modules). Can be used to connect SeaI/O RS-232
modules to both Sealevel and standard RS-232 serial ports
(included with 4xxS SeaI/O RS-232 modules as part of p/n:
KT119). Optionally, it can be used as an RS-485 interconnect
cable to cascade additional SeaI/O modules via the RS-485
In/Out ports on the side of SeaI/O modules