Impulse 463N - Manual (Page 64)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 64
You can now change the Network SSID, Topology, Channel, and Security Settings to match your
wireless network. After making your changes and clicking OK, the device will reboot and take
up to 20 seconds to appear on the network using your new settings. If you change the SSID
and/or network Topology and/or Channel, you‟ll have to reconnect to the SeaI/O module. Close
Ethernet Config for now.
The supported wireless configuration settings are detailed on the following page.
The Network SSID, wireless network channel, and security settings are specific to your
wireless network. Consult your IT department if you are unsure of your wireless network
settings.
Once you change the wireless configuration and click the OK button, the wireless SeaI/O
module will disappear from the Ethernet Config window. The SeaI/O module will now be
configured to work with your wireless network, but will likely be on a different subnet. You
still need to configure the Device Network Settings before the module will work with your
wireless network.